scm435 quenched & tempered steel round bar
scm435 steel is a Chromium-Molybdenum through-hardening steel of medium hardenability. It is a general purpose high-tensile steel with medium strength level and good impact properties.
Quenching and Tempering, abbreviated as Q&T is a king of processing that strengthen or harden steel bars by heating the materials and then cooling in water, oil or other liquid medium, that rapidly the change from austenite to perlite to get the proper properties for various usage. The quenched & tempered steel bar materials are usually with carbon from 0.30% - 0.60%, it is widely used as merchant bars in components of various machines.
scm435 material quenched and tempered q&t steel bar we supply includes following advangtages:
Consistent mechanical properties
Deep mechanical properties (from surface to the center according to your requirement)
Even hardness on the whole bars/Tougher and Increased strength
No brittle, UT testing/Precision size tolerance/Good straightness
Good Roughness/Professional technical service/Competitive price/Fast delivery
Specification of scm435 material quenched and tempered q&t steel bar we supply:
1. scm435 steel equivalent material:
GB | ASTM/SAE/AISI | DIN | SCM | AS /NZS1444 |
35CrMo | Aisi 4137 / sae 4137/ astm 4137 | 34CrMo4 | SCM435 | AS 4137 |
2. scm435 steel chemical composition:
Materail | Chemical Composition % |
| C | Si | Mn | S | P | Cr | Mo |
34CrMo4 | 0.30-0.37 | 0.40 max | 0.60-0.90 | 0.035 max | 0.035 max | 0.90-1.20 | 0.15-0.30 |
4137 | 0.35-0.40 | 0.15-0.35 | 0.70-0.90 | 0.030 max | 0.040 max | 0.80-1.10 | 0.15-0.25 |
SCM435 | 0.33-0.38 | 0.15-0.35 | 0.60-0.85 | 0.035 max | 0.035 max | 0.90-1.20 | 0.15-0.30 |
3. scm435 steel mechanical properties:
Mechanical Properties |
Yield Strength (MPa) | Tensile Strength (MPa) | Elongation | Reduction of area | AKV (J) |
785min | 930min | 12% min | 50% min | 63 min |
4. scm435 steel applications:
high strength stud bolt, Threaded Rods, wind power bolt, prestressed anchor bolts, post stressed anchor bolt, Steel Tie Rod, tie bar, tension rod, Tension Bar etc. Shaft, axle shaft, crankshaft, shaft for sleeve, linear shaft, pump shaft, rotor shaft, sensor shaft, spline shaft, drive shaft, mandrel shaft, transmission shaft, screw rod etc. CNC machines, precision CNC machines etc. Ejector pins and Ejector rods
Heat treated steel bar - Quenched And Tempered Steel Bar can be used to produce High Strength Marine Anchor Bolt, Wind Turbine Anchor Bolt, Mining And Tunneling Rock Bolt, High Strength Steel Bolts, Sheet Pile Tie Rods, Marine Sheet Pile Tie Rod For Wharves, Post Tension Bar For Bridge, Tie Bar Construction, Structural Steel Tie Bars and high strength required steel shafts etc.